How the graphic gets on the board
Vinyl wraps are applied as a printed sheet across the top. They produce sharp full-coverage artwork and a uniform surface, and they can lift at the edges or around the hole if the edges are not sealed well.
Direct print puts ink onto the prepared surface, then a clear coat goes over it. Stain and paint work, including stencils and hand-painted logos, is the third route and gives the most control over how much of the wood grain shows.
| Method | Look | Durability concern | Best for |
|---|---|---|---|
| Vinyl wrap | Full-coverage photographic | Edge lift around hole and corners | Complex art and photos |
| Direct print with clear coat | Sharp, integrated into finish | Wear shows through clear coat over time | Logos and multi-color designs |
| Stain and stencil | Wood grain visible | Touch-ups needed at high-wear spots | Simple marks and monograms |
| Hand painted | One-off, textured | Least consistent surface friction | Art pieces more than league boards |
| Engraved or routed inlay | Recessed detail | Recesses can catch bags if in the play area | Border and edge detail |
Surface finish and play
Customization changes how the board plays. A wrap and a clear-coated print will not have identical friction, so ordering two boards from different processes or different shops gives you a mismatched pair.
Ask what the final coat is and how many coats are applied. If you want a faster surface, say so during ordering, since finish is easier to specify up front than to change afterward.
Artwork you need to supply
Ask the supplier for its artwork template, bleed area and resolution requirements. A small web logo can look soft when enlarged across a board; send the original artwork file when available.
Keep important artwork clear of the hole. Its center is 9 inches from the back edge and the opening is 6 inches across; a bag on the board can obscure nearby text.
Licensing and lead time
Team logos, university marks, and commercial characters are licensed. Shops that offer them are working under a license, and a shop that will print any logo you send may be leaving the rights question with you.
Custom work runs longer than stock inventory because of art proofing and finishing time. If boards are for a specific event, ask for the proof deadline rather than only the ship date.
Gear to consider
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases, at no extra cost to you.
BoardsCheck price on AmazonGoSports Solid Wood Cornhole Set
4 × 2 ft; two boards, eight bags and case
Full-size wood boards for a permanent backyard setup, with a plain surface you can personalize.
Decals and custom artwork are not included.
AccessoriesCheck price on AmazonTailgating Pros Board Carrying Case
Heavy-duty 1680D case for 4 × 2 ft boards
A padded shoulder strap and one cover make a pair of boards easier to move.
Check the listed 123 × 62 × 22 cm dimensions against your boards and folded legs.
A few common questions
Does a vinyl wrap make the board slower or faster?
It changes the surface, and the direction depends on the specific vinyl and any coating over it. Order both boards of a pair with the same process so the two ends of the lane match.
Can I have any logo printed?
Licensed marks belong to their owners, and a shop that prints anything sent to it is not clearing those rights for you. For a team or business logo you own, supply vector art sized for a 48 by 24 inch surface.